kok电竞体育

kok电竞体育:宋明

发布者:郑健发布时间:2018-03-28浏览次数:4368

出生年月:1984.9

职称:副教授/硕导

学历:博士

办公室:工科D727

E-mail:songmingx@gmail.comsongmingx@upc.edu.cn

 

研究领域

清洁能源材料与装备、石油化工装备结构完整性,设备失效分析与预防,材料力学行为尺度效应,材料微观结构X射线衍射技术,残余应力的测量和计算。

教育经历

2010.10-2012.11 University of Saskatchewan, Department of Mechanical Engineering, 博士联合培养(导师:Jerzy A. Szpunar教授);

2009.03-2013.03 华东理工大学 机械与动力工程学院 材料科学与工程,博士 (导师:关凯书教授);

2007.09-2009.02 华东理工大学 机械与动力工程学院 材料科学与工程,硕士阶段(导师:关凯书教授);

2003.09-2007.06 华东理工大学 外国语学院 英语专业(第二专业);

2003.09-2007.06 华东理工大学 机械与动力工程学院 金属材料工程专业,工学学士。

工作经历

2015.04-至今 kok电竞体育 从事教学科研工作;

2013.04-2015.03 University of Saskatchewan, Department of Mechanical Engineering, 博士后研究员(合作导师:Jerzy A. Szpunar教授)。

主讲课程

《工程力学》,《材料力学》,留学生全英文《Mechanics of Materials》,《力学与实践》

主要论文

期刊论文:

1.   Song, M., Li, X. Y., Cao, Y. G., Zhen, Y., Zhong, J. R., Guan, K. S. Determination of elastoplastic properties of in-service pipeline steel based on backpropagation neural network and small punch test. International Journal of Pressure Vessels and Piping, 2021(190): 104316.

2.   Zhang W. Y., Song, M., Jiang W. C., Sun G.A., Shan G. B., Chen M. D., Bai Y. Z. Fatigue failure mechanism of 2205 duplex stainless steel using the neutron diffraction and EBSD technologies. International Journal of Fatigue, 2022(159): 106828.

3.   Song, M., Zhang W. Y., Jiang W. C., Wang, J. G., Zhao, X., Zhai, X. N. Fatigue Life Assessment of the Shell Structure of Purified Terephthalic Acid Filter Press. Materials. 2020(13): 3276.

4.   Luo. Y., Jiang W. C., Zhang, Y. C., Yang, B., Song, M., Chen, J. K. Effects of dual-cracks on the creep crack growth behaviour of HastelloyC276-BNi2 brazed joints. Materials at High Temperatures, 2020(37): 230-242.

5.   Xiao, C. R., Jiang, W. C.*, Yu, Y., Song, M.*, Tu, S. T., Gong, J. M. Influence of borides dissolution during the homogenization treatment on the mechanical properties and fracture behavior of austenitic stainless steel brazed joints. Materials Science and Engineering A, 2020(782): 139200.

6.   Wang, Y., Jiang, W. C., Song, M., Luo, Y., Tu, S. T. Effect of inhomogeneous oxidation on the mechanical degradation of anode supported solid oxide fuel cell. Journal of Power Sources, 2020(450):227663.

7.   Zhong, J. R., Song, M., Guan, K. S., Dymacek, P. Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test. International Journal of Mechanical Sciences. 2020(166): 105195.

8.   Cao, Y. G., Zhen, Y., Song, M., Yi, H. J., Li, F. G., Li, X. Y. Determination of Johnson-Cook parameters and evaluation of Charpy impact test performance for X80 pipeline steel. International Journal of Mechanical Sciences, 2020(179): 105627.

9.   Song, M., Wei, Z. Q., Wang, B. Y., Chen, L.; Chen, L., Szpunar, J. A. Study on copper protrusion of through-silicon via in a 3-D integrated circuit. Materials Science and Engineering A. 2019(755): 66-74.

10.Wan, Y., Jiang, W. C., Song, M., Huang, Y. L., Li, J., Sun, G. A., Shi, Y., Zhai, X. N., Zhao, X. Ren, L. C. Distribution and formation mechanism of residual stress in duplex stainless steel weld joint by neutron diffraction and electron backscatter diffraction. Materials & Design, 2019(181): 108086.

11.Wang, Y., Jiang, W. C., Song, M., Zhang,Y. C., Tu, S. T. Effect of frame material on the creep of solid oxide fuel cell. International Journal of Hydrogen Energy, 2019(44): 20323-20335.

12.Hu, X. D., Yang, Y.C., Song, M.* Experimental and numerical investigations on the thermomechanical behavior of 304 stainless steel/Q345r composite plate weld joint. Materials. 2019(12):3489.

13.Zhang, W.Y., Jiang, W. C., Yu, Y., Zhou, F., Luo Y., Song, M. Fatigue crack simulation of the 316L brazed joint using the virtual crack closure technique. International Journal of Pressure Vessels and Piping, 2019(173): 20-25.

14.Zhang, W. Y., Jiang, W. C., Yang, B., Song, M., Zhai, X. N. Dynamic fracture behavior of 316l brazed joint: study with experimental and finite element methods. Proceedings of the ASME pressure vessels and piping conference, 2018(3A): UNSP V03AT03A023.

15.Song, M., Mundboth, K. R., Szpunar, J. A., Chen, L., Feng, R. F. Characterization of local strain and stress in copper Through-Silicon Via structures using synchrotron X-ray microdiffraction, electron backscattered diffraction and nonlinear thermomechanical model. Journal of micromechanics and microengineering. 2015(25): 085002 (14pp).

16.Song, M., Gurao, N. P., Guan K.S.,Szpunar, J. A. Deciphering deviation in mechanical properties of differentlyprocessed AISI 316L austenitic stainless steel using Small Punch Test. Materials Science and Engineering A. 2015(628): 116-123.

17.Song, M., Chen, L., Szpunar J. A.Thermo-mechanical characteristics of copper TSV structures. IEEE transactionson components, packaging and manufacturing technology. 2015(5): 225-231.

18.Song, M., Guan, K.S., Qin, W.,Chen, J., Szpunar, J. A. Size effect criteria on the small punch test for AISI316L austenitic stainless steel. Materials Science and Engineering A. 2014(606): 346-353.

19.Song, M., Guan, K.S., Qin, W.,Szpunar, J. A. Comparison of mechanical properties in conventional and smallpunch tests of fractured anisotropic A350 alloy forging flange. Nuclear Engineering and Design, 2012(247): 58-65.

20.Song, M., Guan, K.S. Failureanalysis of a weld-decayed austenitic stainless steel. Engineering Failure Analysis, 2011(18): 1613-1618.

21.Wu, S., Xu, T., Song M., Guan K. Mechanical properties characterization of welded joint of austenitic stainless steel using instrumented indentation technique, Materials at High Temperature. 2016(33): 270-275.

22.Chen, L., Bu, S., Song, M., Ning, J., Zeng, C., Luo, Z. A Novel Notch System Having Two Stopbands Based on Duplexer for Broadband Applications. IEEE Microwave and Wireless Components Letters, 2016(26): 577-579.

23.Chen L., Zeng, C., Song M., Bu, S.R., Ning, J.S., Luo, Z.X. A Novel Method to Measure Microwave Critical Current Densities at Different Frequencies in HTS Thin Films. Journal of Superconductivity and Novel Magnetism, 2016(29): 3133-3138.

24.Guan, K.S., Song, M., Huang, Y.C., Zhao, L.X. Definition of yield load on small punch test by means of double slope of elastic curve. 2008 Fracture Mechanics Symposium, Evaluation, Inspection and Monitoring of Structural Integrity-2008: 447-450.

25.Guan, K.S., Hua, L., Wang, Q.Q., Zou, X.H., Song, M. Assessment of toughness in long term service CrMo low alloy steel by fracturetoughness and small punch test. Nuclear Engineering and Design, 2011(241): 1407-1413.

26.宋明,杜传胜,王炳英,马帅,蒋文春.梯度孔隙阳极固体氧化物燃料电池的热应力.硅酸盐学报, 2022(50): 1233-1240.

27.宋明,马帅,杜传胜,王炳英,蒋文春.多物理场耦合作用下平板式固体氧化物燃料电池的蠕变损伤行为. 硅酸盐学报, 2022(50): 212-218.

28.宋明,杜传胜,王炳英,曹宇光,马帅.小冲杆高温蠕变试验平台在力学实验教学中的应用. 实验力学,2021(36): 647-654.

29.宋明, 王文慧, 杜传胜, 王炳英, 蒋文春. 平板式固体氧化物燃料电池多物理场耦合建模. 工程热物理学报,2021(42): 2401-2408.

30.宋明, 马帅, 蒋文春, 杜传胜, 王炳英. 小冲杆试验评价平板式固体氧化物燃料电池钎焊密封接头力学性能研究. 机械工程学报, 2021(57): 178-186.

31.宋明, 王文慧, 杜传胜, 王炳英, 蒋文春. 平板式固体氧化物燃料电池的热机械行为. 硅酸盐学报, 2021(49): 476-482.

32.宋明, 马帅, 杜传胜, 王炳英, 蒋文春. 基于小冲杆试验的固体氧化物燃料电池钎焊密封接头蠕变损伤演化规律. 焊接学报, 2020(41): 55-60+100.

33.宋明, 李旭阳, 曹宇光, 甄莹, 司伟山. 基于BP神经网络与小冲杆试验确定在役管道钢弹塑性性能方法研究. 力学学报. 2020(52): 82-92.

34.宋明, 王文慧, 吴琼, 曹宇光, 杜传胜. 基于Matlab/GUIABAQUS的小冲杆实验学习与应用平台设计. 实验室研究与探索, 2020(39): 43-47.

35.宋明, 李旭阳, 曹宇光, 司伟山, 甄莹. 小冲杆试验评估X80管线钢的拉伸性能. 机械工程材料, 2020(44): 74-78.

36.胡效东, 王吉涛, 杨熠成, 宋明*, 齐鹏飞. 304/Q345R复合板焊接接头微观组织及残余应力. 焊接学报(41): 39-45+99.

37.曹宇光, 伍志明, 司伟山, 甄莹, 宋明*, 李旭阳, 蒋毅. 基于小冲杆试验的X80管道钢断裂韧性研究. 中国石油大学学报(自然科学版), 2020(44): 131-138.

38.宋明, 关凯书, 赵立勋, 王志文. 基于A350锻件各向异性材料的小冲杆试验研究. 压力容器, 2010(27): 1-6+15.

39.关凯书, 徐彤, 宋明, 赵立勋, 王志文. 小冲杆试验确定材料拉伸断后伸长率的研究. 实验力学, 2011(02): 209-215.

部分会议论文:

1.   Song M., Ma, S., Du, C. S., Wang, B. Y., Jiang, W. C. Damage and creep behavior in planar SOFC by modeling of multiphysics coupled, 2021 International Symposium on Structural Integrity, Hangzhou, China, Oct. 2021.

2.   Song, M., Li, X. Y., Cao, Y. G., Jiang, W. C., Zhong, J. R., Guan, K. S. Determination of Elastoplastic Properties of In-service Pipeline Steel Based on Backpropagation Neural Network and Small Punch Test, 2020 International Symposium on Structural Integrity, Suzhou, China, Oct. 2020.

3.   Song, M., Wei, Z. Q., Chen L., Jiang W. C., Szpunar J. A. Effects of Annealing Temperatures on Copper Protrusion of Through-Silicon Via in the 3-D Integrated Circuit. 2018 International Symposium on Structural Integrity, Nanjing, China, Nov. 2018.

4.   Song, M., Gurao, Nilesh P., Guan, K. S., Szpunar, J. A. Effects of textures of unidirectional and multi-step cross rollings on AISI 316L austenitic stainless steel by means of small punch test, the 4th International Conference on Small Sample Test Technique, Shanghai, Oct. 2016.

5.   Song, M., Mundboth, K. R., Chen, L., Szpunar J. A., Feng, R. Characterization of residual stress in TSV structures in 3D IC by using Synchrotron X-ray microdiffraction and Electron Backscattered Diffraction. 26th Canadian Materials Science Conference, Saskatoon, Canada, Jun. 2014.

6.   Song, M., Qin, W., Szpunar, Jerzy A., Guan, K. S. Effects of grain size and specimen size on small punch test of type 316L austenitic stainless steel. 33rd CNS (Canadian Nuclear Society) Annual Conference and 36th Annual CNS-CNA Student Conference, Saskatoon, Canada, Jun. 2012.

7.   Song, M., Guan, K. S., Zhao, L. X., Wang, Z. W. The study of anisotropy properties of A350 pressure vessel steel forging by small punch test. 2010 International Symposium on Structural Integrity, Structuralintegrity and materials ageing in extreme conditions, Shanghai, China, Oct. 2010.

 

1.   宋明, 鲁岩杰, 蒋文春, 王炳英, . 一种小冲杆疲劳试验获得材料应变-寿命曲线的方法, 发明专利, ZL202010346779.8, 2021/05/31, 授权.

2.   宋明, 杜传胜, 王炳英, . 一种多物理场耦合作用下SOFC数值模拟方法, 发明专利, CN202010346779.8, 2020/04/28, 实审.

3.   宋明, 鲁岩杰, 蒋文春, . 一种多功能微试样测试系统、方法、石油化工及核电设备, 发明专利, CN202010427171.8, 2020/05/19, 实审.

4.   宋明, 鲁岩杰, 吴琼, . 一种小冲杆试验获取超薄材料弹塑性性能的方法, 发明专利, ZL201911052378.5, 2019/10/31, 授权.

5.   宋明, 曹宇光, 李旭阳, . 一种金刚石线锯在役管道切割装置, 发明专利, ZL201910365218.X, 2019/04/30, 授权.

6.   宋明, 石越, 吴琼, . 用于制备金属电子背散射衍射试样的振动抛光机, 发明专利, ZL201910274044.6, 2019/04/08, 授权.

7.   宋明, 杜传胜, 曹宇光, . 一种用于在役油气管道外壁小试样的电火花切割取样器, 发明专利, ZL201811517987.9, 2018/12/12, 授权.

8.   宋明, 吴琼, 王玉柱, . 一种紧凑型小冲杆试样制备工具, 发明专利, ZL201811177070.9, 2018/10/10, 授权.

9.   宋明, 吴琼, 邓雪君, . 一种多功能小冲杆微试样磨具, 发明专利, ZL201811177088.9, 2018/10/10, 授权.

10.曹宇光, 宋明, 李旭阳, . 设备材料力学性能测试方法、系统、介质、计算机设备, 发明专利, CN202010767200.5, 2020/08/03, 实审.

11.蒋文春, 魏志全, 罗云, 张伟亚, 宋明, 徐书根, 王炳英, 王振波. 一种三介质编织式金属丝网材料换热器及制作方法, 发明专利, ZL201610181033.X, 2016/03/28, 授权.

12.罗云, 蒋文春, :煜, 胡效东, 杨滨, 张玉财, 宋明, 周凡, 陈建飞, 任林昌. 用于降低全场焊接残余应力的高压水射流喷嘴及装置, 发明专利, ZL202010210306.5, 2020/03/24, 授权.

13.基于Matlab/GUIABAQUS的小冲杆试验学习与应用平台,软件著作权, 2021SR0250130, 2021/02,授权.

14.Method for numerical simulation of solid oxide fuel cell (SOFC) under multiphysics coupling, 澳大利亚专利,2021103150, 2021/07/28, 授权.

研究项目

1.   国家重点研发计划,高可靠性SOFC电堆寿命预测与优化设计方法子课题(2021YFB4001501),2021/12-2025/11,在研,主持;

2.   国家自然科学基金青年基金,固体氧化物燃料电池关键构件多物理场耦合作用下的热机械行为研究,2018/01-2021/12,结题,主持;

3.   山东省自然科学基金博士基金,多场耦合作用下固体氧化物燃料电池密封接头和膜电极组件的热机械疲劳行为研究,2017/09-2019/09,结题,主持;

4.   青岛市自主创新计划应用基础研究项目基金,2016/09-2018/09,结题,主持;

5.   中央高校基本科研业务费专项资金,008027R1515030A,微观结构材料力学行为尺度效应的机理研究,2015/09-2018/09,结题,主持;

6.   中国石油大学科研启动基金,Y1615003,微观结构材料残余应力测量及力学行为尺度效应机理研究,2017/01-2018/12,结题,主持;

7.   国家重点研发计划,油气管道及储运设施完整性评价技术研究子课题(2016YFC0802105),2016/10-2021/12,结题,骨干;

8.   国家重点研发计划,临海油气管道完整性管理技术研究及示范应用子课题(2016YFC0802306),2016/10-2021/12,结题,骨干;

9.   中国国家自然科学基金(面上),51075148,小冲杆试验评价在役结构强度的微试样尺度效应研究,2011/01-2014/12,结题,参加;

10.中国国家质检总局项目,200810405,在役设备材料性能小冲杆试验方法,2009-2011,结题,参加。

获奖情况

2021年,滩浅海油气管道安全保障关键工程技术,国家海洋工程科学技术奖,二等奖,排名:7/9

2021年,第十三届全国周培源大学生力学竞赛,优秀指导教师;

2021年,第三届国际大学生工程力学竞赛(亚洲赛),优秀指导教师;

2020年,kok电竞体育“十佳百优班主任”,“优秀工会干部”称号;

2019年,获kok电竞体育教学成果奖,二等奖,排名:2/3

2019年,kok电竞体育“十佳百优班主任”,“优秀工会会员”称号;

2018年,kok电竞体育“优秀共产党员”称号;

2017年,kok电竞体育“十佳百优班主任”,“优秀工会会员”称号;

2017年,kok电竞体育青年教师教学比赛,三等奖;

联系地址

青岛市经济开发区长江西路66号 工科楼D座,266580

学术兼职

Materials and Design, Applied Surface Science, Journal of Nuclear Materials, IEEE Access, RSC Advances, International Journal of Mechanical Sciences, International Journal of Minerals, Metallurgy and Materials等国际期刊审稿人。

备注

招收力学、材料、过程装备与控制工程方向硕士研究生。


校内导航

友情链接

关注我们

kok电竞体育(集团)有限公司